OUTPUT WATTAGE

• 400W

BEST SOLUTION FOR

• Server ,Workstation ,Storage System ,IPC

DIMENSION

• 215x100x70(mm)
• 8.46x3.94x2.76(inch)

INPUT SPEC

• VOLTAGE： 90～264 VAC FULL RANGE 
• FREQUENCY： 47～63HZ 
• INPUT CURRENT：6A (RMS) FOR 115 VAC; 3A (RMS) FOR 230 VAC 
• INRUSH CURRENT：40A MAX. FOR 115 VAC; 60A MAX. FOR 230 VAC

FEATURES

• TEMPERATURE RANGE：OPERATING 0℃～40℃
• HOLD UP TIME：16mS MINIMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE
• DIELECTRIC WITHSTAND：INPUT/OUTPUT 1800 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1800 VAC FOR 1 SECOND
• EFFICIENCY：83% TYPICAL AT 115VAC , FULL LOAD
• POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS，OFF DELAY 1mS
• OVER POWER PROTECTION：110～160% MAX
• OVER VOLTAGE PROTECTION：+5V→5.6V～6.6V +3.3V→3.6V～4.3V +12V→13.2V～15V
• SHORT CIRCUIT PROTECTION：+5V、+12V、+3.3V
• EMI NOISE FILTER : FCC CLASS A, CISPR22 CLASS A
• SAFETY : TO MEET UL, CUL, TUV
• REMOTE ON/OFF CONTROL THE POWER SUPPLY SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE/ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STAND BY). AS LOGIC LEVEL IS LOW，OUTPUTS VOLTAGE WERE ENABLE， AS LOGIC LEVEL IS HIGH，OUTPUTS VOLTAGE WERE DISABLE.
• 3.3V & 5V REMOTE SENSING
• COOLING: ONE 60mm DC FANS
• MEET IEC-1000-3-2 CLASS D

*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.